Power Control; Digital Setup; Audio Setup; No Signal Off - Sharp Aquos LC 26D4U Operation Manual

Sharp liquid crystal television operation manual
Hide thumbs Also See for Aquos LC 26D4U:
Table of Contents

Advertisement

Basic adjustment settings

Power Control

Power control setting allows you to save energy.

No signal off

When set to "Enable", the power will automatically shut
down if no signal inputs for 15 minutes.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Power Control".
3
Press a/b to select "No Signal Off", and
then press ENTER.
4
Press c/d to select "Enable", and then
press ENTER.
Enable
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• "Disable" is factory preset value.
• When a TV program finishes, this function may not operate.

No operation off

When set to "Enable", the power will automatically shut
down if there is no operation for 3 hours.
1
Repeat steps 1 and 2 in No signal off.
2
Press a/b to select "No Operation Off", and
then press ENTER.
3
Press c/d to select "Enable", and then
press ENTER.
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• "Disable" is factory preset value.
28

Digital Setup

This setting allows you to optimize the settings of Digital
broadcasting.

Audio Setup

You can output digital audio to an AV amplifier or similar
device whose DIGITAL AUDIO INPUT terminal is
connected to the DIGITAL AUDIO OUTPUT terminal
on the TV (see page 30). Please select an audio output
format compatible with the audio format of the program
you are watching and the equipment connected.
1
2
3
4
Disable
Selected item
PCM
Dolby Digital
Press MENU and the MENU screen displays.
Press c/d to select "Digital Setup".
Press a/b to select "Audio Setup", and then
press ENTER.
Press a/b to select "PCM" or "Dolby
Digital", and then press ENTER.
PCM
Dolby Digital
Description
The optical output terminal outputs
audio signal by PCM form. If your
digital audio system does not
support Dolby Digital, select
"PCM".
The optical output terminal outputs
audio signal by Dolby Digital form.
It reproduces sound from surround
program of digital.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents