Electrical Connection - Miele DA 6066 W Operating And Installation Instructions

Electrical connection


Installation, repairs and other
work by unqualified persons could
be dangerous. The manufacturer
cannot be held liable for
unauthorised work.
All electrical work should be
undertaken by a suitably qualified
and competent person in strict
accordance with current national and
local safety and building regulations.
This cooker hood must only be
connected to a properly installed
electrical circuit.
The electrical installation must comply
with national regulations (BS 7671 in
the UK).
For extra safety, it is advisable to
protect the appliance with a suitable
residual current device (RCD) with a trip
range of 30 mA (DIN VDE 0664).
It is advisable to connect this appliance
via a suitable plug and socket to make
it easy to disconnect for servicing
purposes. The socket and switch must
be easily accessible after the appliance
has been installed.
Alternatively it can be hard-wired.
If the mains socket and switch are not
accessible after the appliance has been
installed, or if it is hard-wired, a
separator for each terminal must be
present. There must be an all-pole
contact gap of at least 3 mm in the
switch.
This includes the switch, fuses and
relays (in accordance with EN 60335).
34
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
The connection data is given on the
data plate (See "After sales service").
Ensure that this data matches the
voltage and frequency of the household
mains supply.