Section 6: Troubleshooting; General Information - Vanair Viper Series Operator's Manual & Parts List

VIPER DIESEL
TROUBLESHOOTING

6.1 GENERAL INFORMATION

The information contained in this section has
been compiled from years' worth of informa-
tion gathered from the field. It contains symp-
toms and usual causes for the most common
types of problems that may occur. All avail-
able data concerning the trouble should be
systematically analyzed before undertaking
any repairs or component replacement.
A visual inspection is worth performing for
almost all problems and may avoid unneces-
sary additional damage to the machine. The
procedures which can be performed in the
least amount of time and with the least
amount of removal or disassembly of parts
should be performed first.
Before starting, performing maintenance,
or replacing parts, relieve the entire
system pressure by opening a service
valve, which will vent all pressure to the
Although Vanair
tions that may occur during the operation life
of the machine package, the Troubleshooting
Guide may not cover all possible situations.
Be aware that additional troubleshooting
information may be found in other sources,
such as the Engine Operator's Manual.
Should the situation remain unresolved after
exhausting available sources, contact the
Vanair Service Department at:
Phone: 800-526-8817 (toll free)
Phone: 219-879-5100
Fax: 219-879-5335
VANAIR MANUFACTURING, INC.
(800) 526-8817 • www.vanair.com
SECTION 6:
WARNING
atmosphere.
®
strives to anticipate situa-
090058-OP_r0 (AUGUST-2014)

SECTION 6: TROUBLESHOOTING

NOTE
When contacting the Vanair Service
Department, please have machine serial
number on hand to quickly expedite
service. See below for machine serial plate
location.
Figure 6-1: Machine Serial Plate Location
NOTE
Machine serial number also displays on
instrument panel at start-up, on the hours
screen.
PAGE - 23