Page 2
2018 – Jurop – Azzano Decimo (PN) Reproduction, electronic storage and dissemination, even partial, are prohibited. Jurop reserves the right to modify the products described in this manual without prior notice. Any product names mentioned herein are the trademarks of their respective owners.
USE AND MAINTENANCE MANUAL Contents General warnings pag. – LC 300-420-580 D SPARE PART DATA SHEET Introduction – LC 300-420-580 M540/1000 HDR 22 SPARE PART DATA SHEET Spare part request – L LC300-420-580 25 SPARE PART DATA SHEET UBRICATION LINES Warranty terms and conditions –...
. 10 – INSTALLATION USE AND MAINTENANCE MANUAL LC 300-420-580 30-01-2018 1. General warnings 1.1. Introduction 1.2. Spare part request • This booklet contains the necessary instructions for a correct • Use only genuine spare parts for maintenance and repairs. To...
SUCTION AIR FILTER SWIVELLING CONVEYORS VARIOUS SIZES AVAILABLE COOLING WATER PUMP AUTOMATIC LUBRICATION SIDE MOUNTED OIL TANK Weight LC 300 LC 420 LC 580 Direct with smooth shaft 195 kg 210 kg 232 kg With gear box 540 rpm o 1000 rpm...
. 10 – INSTALLATION USE AND MAINTENANCE MANUAL LC 300-420-580 30-01-2018 Flow - power Vacuum Pressure (abs) Model Free port 1,5 bar 1,8 bar 2,0 bar LC 300 l/min 8500 8000 7400 6420 4760 3450 7500 7250 7000 LC 420...
. 10 – INSTALLATION USE AND MAINTENANCE MANUAL LC 300-420-580 30-01-2018 4.1. Checking upon receipt • Make sure that there is enough free room around the pump for a correct air cooling circulation and protect the pump from the exposure to dirt and debris.
. 10 – 30-01-2018 INSTALLATION USE AND MAINTENANCE MANUAL LC 300-420-580 • Safety valves: 4.7. Pneumatic actuator adjustment - Overpressure safety valve (pos. 5): mount it close to the pump. The valve flow must prevent the LC pump from exceeding the absolute pressure of •...
Page 12
. 10 – INSTALLATION USE AND MAINTENANCE MANUAL LC 300-420-580 30-01-2018 B) Belt drive • Apply an adequate belt tension (see manufacturer’s data). Max 3000N. • Do not use driven or driving pulleys with a pitch diameter inferior CHECK BELT TENSION to 180 mm.
This vacuum pump is designed to work at maximum speed, but for longer operating we recommend the pump be run at working speed (see par. 2.3). • Prepare adequately transmission. Jurop SpA . +39 0434 636811 F . +39 0434 636812 http://www.jurop.it Via Crosera n° 50 13 / 32 e-mail: info@jurop.it...
. 10 – INSTALLATION USE AND MAINTENANCE MANUAL LC 300-420-580 30-01-2018 6. Maintenance 6.1. Ordinary maintenance • Installation and maintenance must be operated only by qualified personnel wearing the proper clothes and the necessary tools as well as protection devices.
Repeat possible vacuum loss. the valve adjustment, if necessary. Pic. 6.5 Pic. 6.3 Jurop SpA . +39 0434 636811 F . +39 0434 636812 http://www.jurop.it Via Crosera n° 50 15 / 32 e-mail: info@jurop.it...
Page 16
. 10 – INSTALLATION USE AND MAINTENANCE MANUAL LC 300-420-580 30-01-2018 Attenzione: get the valve back into the previously “marked” position. Otherwise, the valve may • Do not flip the seal ring during work improperly. rotation of the shaft. Do not leave foreign objects inside the pump.
Do not dispose of in the environment. Dispose of in compliance with the standards in force. Material Cast Iron Steel Alluminum Copper Bronze Rubber Vane Gasket LC 300 88,0 % 9,0 % 0,6 % 0,2 % 0,1 % 0,4 % 0,6 % 0,5 % 0,4 % LC 420...
LC 300-420-580 D 30-01-2018 LC 300-420-580 D LC D DX – lubrication line LC 300 D SX – Manifold with non-return valve (rubber ball) LC 420-580 D SX Manifold with non-return valve (clapet) Jurop SpA . +39 0434 636811 F .
33082 Azzano Decimo, PN (ITALY) Tel. +39 0434 636811 Fax. +39 0434 636812 http://www.jurop.it e-mail: info@jurop.it Jurop SpA reserves the right to modify the products described in this manual without prior notice. Jurop SpA . +39 0434 636811 F . +39 0434 636812 http://www.jurop.it Via Crosera n°...
Need help?
Do you have a question about the LC 300 and is the answer not in the manual?
Questions and answers