Garmin GDL 82 Installation Manual page 10

1 TSO & System Information
1.1 Certification................................................................................................................................................... 1-1
1.2 Reference Documents.................................................................................................................................... 1-4
1.2.1 Environmental Qualification Form............................................................................................................ 1-4
1.2.2 Continued Airworthiness......................................................................................................................... 1-4
1.2.3 License Requirements .............................................................................................................................. 1-5
1.3 System Limitations ......................................................................................................................................... 1-5
1.1 Certification
This installation manual provides mechanical and electrical information necessary to install the GDL 82. It is not
equivalent to an approved airframe-specific maintenance manual, installation design drawing, or installation data
package. The content of this manual assumes use by competent and qualified personnel using standard maintenance
procedures in accordance with Title 14 of the Code of Federal Regulation and other related accepted procedures.
The conditions and tests required for approval of this article are minimum performance standards. Those installing this
article either on or within a specific type or class of aircraft must determine that the aircraft installation conditions are
within the standards which include any accepted integrated functions not specified by the standards. TSO articles,
articles approved with 14 CFR part 21.8(d), and any accepted integrated function(s) not specified in the standard must
have separate approval for installation in an aircraft. The article may be installed only according to 14 CFR part 43 or
the applicable airworthiness requirements. This is an incomplete system intended to provide the functions identified in,
and when installed according to the installation manual.
The Appliance Project Identifier (API) for the GDL 82 is GMN-01560. The API has been used for project identification
with the FAA.
It is the installer's responsibility to ensure the ADS-B Out system is compliant with 14 CFR 91.227 and to ensure
compatibility between the GDL 82 and the ADS-B Out position source equipment. Refer to Garmin ADS-B Out
Compatible Equipment, for compatible equipment shown to be eligible for 14 CFR 91.227-compliant installations in
accordance with AC 20-165B.
190-01810-00
Rev. 5
TSO & System Information
GDL 82 TSO Installation Manual
Page 1-1