Ecofeedback - Miele WKG 120 WCS Operating Instructions Manual

EcoFeedback

You can call up information about the
energy and water consumption of your
washing machine with the EcoFeedback
sensor.
The following information will appear in
the display:
– an estimate of the energy and water
consumption before the programme
begins.
– the actual energy and water
consumption during the programme
or at the end of the programme.
1. Estimate
 After selecting a programme, touch
the EcoFeedback sensor.
The estimated energy consumption
levels will be displayed as a bar chart.
Energy          
 Touch the  or  sensor to change
to the estimated water consumption
levels.
Water          
The more bars () visible, the higher the
energy or water consumption.
The estimate will vary depending on the
wash programme, temperature and any
options selected.
The display will change automatically or
you can return to the standard display
by touching the OK sensor.
Washing environmentally and economically
2. Actual consumption
You can view the actual amount of
energy and water used by the
programme which has just been run
both during and at the end of the
programme.
 Touch the EcoFeedback sensor.
Energy
 Touch the  or  to switch to the
water consumption display.
The consumption will alter as the
programme progresses.
If the door is opened or the washing
machine has switched off
automatically at the end of the
programme, the data will revert to
the estimated consumption.
Tip: You can view the consumption

data for the last wash programme in
Settings under Consumption.


0.9 kWh
23