Makita XRH07 Instruction Manual page 17

Table of Contents

Advertisement

Available languages

Available languages

4.
Push the wireless activation button on the tool
briefly. The wireless activation lamp will blink in blue.
2
► 1. Wireless activation button 2. Wireless activation lamp
Description of the wireless activation lamp status
1
► 1 . Wireless activation lamp
The wireless activation lamp shows the status of the wireless activation function. Refer to the table below for the
meaning of the lamp status.
Status
Color
Standby
Blue
Tool
Green
registration
Cancelling
Red
tool
registration
Others
Red
Off
1
Wireless activation lamp
On
Blinking
-
5.
Pull the switch trigger of the tool. Check if the vac-
uum cleaner runs while the switch trigger is being pulled.
To stop the wireless activation of the vacuum cleaner,
push the wireless activation button on the tool.
NOTE: The wireless activation lamp on the tool will
stop blinking in blue when there is no operation for
2 hours. In this case, set the stand-by switch on the
vacuum cleaner to "AUTO" and push the wireless
activation button on the tool again.
NOTE: The vacuum cleaner starts/stops with a delay.
There is a time lag when the vacuum cleaner detects
a switch operation of the tool.
NOTE: The transmission distance of the wireless unit may
vary depending on the location and surrounding circumstances.
NOTE: When two or more tools are registered to one
vacuum cleaner, the vacuum cleaner may start run-
ning even if you don't pull the switch trigger because
an other user is using the wireless activation function.
Duration
2 hours
The wireless activation of the vacuum cleaner is available. The lamp
will automatically turn off when no operation is performed for 2 hours.
When
The wireless activation of the vacuum cleaner is available and the
the tool is
tool is running.
running.
20 seconds Ready for the tool registration. Waiting for the registration by the
vacuum cleaner.
2 seconds
The tool registration has been finished. The wireless activation
lamp will start blinking in blue.
20 seconds Ready for the cancellation of the tool registration. Waiting for the
cancellation by the vacuum cleaner.
2 seconds
The cancellation of the tool registration has been finished. The
wireless activation lamp will start blinking in blue.
3 seconds
The power is supplied to the wireless unit and the wireless activa-
tion function is starting up.
-
The wireless activation of the vacuum cleaner is stopped.
17 ENGLISH
Description

Advertisement

Table of Contents
loading

Table of Contents