Energy Saving Tips; Problem Solving - Beko CDA660F User Manual

ENERGY SAVING TIPS

1- Ensure your appliance is installed in a well ventilated area. If the ambient temperature is
low (but in no case lower than 5 degrees C), then the energy saving will be more. In this
case, check temperatures of fridge and freezer compartments with an accurate
thermometer and lower the thermostat setting (towards 1) if necessary.
2- Ensure the time between buying chilled/frozen food and placing them in your appliance is
kept at minimum, particularly in summer. We recommend you use a cool bag or a special
carrier bag to carry frozen food.
3- Do not leave the door (s) of your appliance open longer than necessary and ensure they
are closed properly after each opening. .
4- Defrost frozen food in the fridge compartment, so that frozen food acts as an ice pack to
assist cooling in the fridge.

PROBLEM SOLVING

If the appliance does not operate when switched on, check whether:
• The plug is inserted properly in the socket and that the power supply is on. (To check the
power supply to the socket, plug in another appliance).
• The fuse has blown/circuit breaker has tripped/main distribution switch has been turned off.
• The temperature control has been set correctly.
• New plug is wired correctly if you have changed the fitted moulded plug.
If the appliance is still not operating after the above checks, please refer to the section on
"How To Obtain Service".
Please ensure that above checks have been made as a charge will be made if no fault is
found.
14