Table of Contents
Advertisement
PART NAMES AND FUNCTIONS
Operation
panel
q Operation panel and keys for printer functions
See the printer manual.
w AUTO/MANUAL/PHOTO (
and indicators (p. 16)
Use to sequentially select the exposure modes: AUTO,
MANUAL (
), or PHOTO (
e ORIGINAL SIZE ENTER (
indicators (p. 18, 20)
Use to input the original size.
r PAPER SIZE indicators
Light up to show the selected copy paper size.
t Alarm indicators
: Paper required indicator (p.13)
: Misfeed indicator (p.36)
: TD cartridge replacement required indicator
(p.32)
: Drum replacement required indicator (p.34)
y AUTO PAPER SELECT (
Paper of the proper size will be automatically selected
depending on the original size and selected copy ratio
when this indicator is on.
u SPF indicator (p. 16)
Lights up when originals are set in the document feeder
tray.
6
q
!4
!5
i Paper feed location/misfeed location indica-
/
/
) key
).
o INTERRUPT key and indicator (p. 29)
) key and
!0 PAPER SIZE ENTER (
!1 Copy quantity display
!2 CLEAR ALL (
!3 POWER SAVE (
) indicator
!4 XY-ZOOM (
!5 B/W REVERSE (
w
!6
!7
tors (p. 36)
The selected paper feed location is shown by a lit
indicator (
).
The general location of misfed paper is shown by a
blinking red indicator (
).
Interrupts a copy run.
Use to set the paper size in a tray.
Displays the specified copy quantity during the ready
condition and displays the copy countdown as copies
are made. Also see items @2 and @4 .
) key
Clears all selected settings and returns the copier to the
initial settings.
) indicator (p. 44)
Lights up when the copier is in the preheat mode.
) key and indicator (p. 25)
Use to change the horizontal and vertical copy ratios
independently.
) key and indicator (p. 27)
Press to reverse the black and white areas.
r t y
u
i
e
!9
!8
) key (p. 15)
@0
Advertisement
Table of Contents
