Table of Contents
Advertisement
REDUCTION/ENLARGEMENT/ZOOM
Reduction and enlargement ratios can be selected either automatically with the
AUTO IMAGE (
) key or manually with the PRESET RATIO selector
(
,
) keys and/or the zoom (
precise copy ratio selection from 50% to 200% in 1% increments.
20
,
) keys. The zoom function enables
Automatic
1
Place the original in the document feeder tray or on the
original table.
2
When using the original table, press the ORIGINAL SIZE
ENTER (
original on the original table lights up.
3
Use the TRAY SELECT (
with the desired paper size.
This feature will not work when copy paper of non-standard size is used
or the bypass tray is used.
Press the AUTO IMAGE (
4
The copy ratio will be automatically set.
If the size and orientation of the original do not correspond to standard
reduction/enlargement ratios for the selected paper tray, then the
ORIGINAL SIZE indicator will blink.
If a PRESET RATIO indicator is blinking, part of the original image
may not be copied.
5
Enter the number of copies.
6
Press the START (
To cancel the automatic reduction/enlargement
mode, press the AUTO IMAGE (
When copying from the SPF with this feature, the
automatic reduction/enlargement mode will be
automatically canceled after copying is complete.
) key until the indicator for the size of the
) key to select the paper tray
) key.
) key.
) key again.
Advertisement
Table of Contents
