Table of Contents
Advertisement
LOADING COPY PAPER
To save space, this copier has been designed with one (AL-1620) or two (AL-1621)
adjustable front-loading trays, which are easily opened for paper loading. For best
results, use only SHARP recommended paper. (See page 50.)
The paper required (
) indicator will light up when there is no copy paper in the
selected paper feed station, or when the selected paper tray is not installed or is
improperly installed.
When the paper size is changed in a paper tray, the size of the
paper must be entered by steps 8 through 11 on page 15. If not,
the edges of copies may become smudged with toner. Also, the
AUTO PAPER SELECT and the AUTO IMAGE features will not
function properly.
Maximum height line
Gently lift and pull out the paper tray until it stops.
1
Push the pressure plate down until it locks in place.
2
3
Fan the copy paper and insert it into the tray. Make sure
the edges go under the corner hooks.
If you change to a different size of copy paper, the tray must be
adjusted. See the next page.
Set the paper along the guides.
The tray holds up to 250 sheets of 21 lb. bond paper.
Do not load paper above the maximum height line.
4
Push the paper tray firmly back into the copier.
13
Advertisement
Table of Contents
