Sharp AL-1215 Operation Manual page 26

Digital multifunctional system
Hide thumbs Also See for AL-1215:
Table of Contents

Advertisement

10
Make sure that the power of the MFP is turned on, and then
connect the USB interface cable or parallel interface cable.
(p.45)
Windows will detect the MFP and the Plug and Play screen will appear. If
you are using Windows XP with the parallel interface, go to step 12.
11
Begin installation of the scanner driver.
1
2
3
12
Begin installation of the printer driver.
1
2
3
You have completed the installation of all the software.
24
"SHARP AL-xxxx" (where xxxx is the model name of your MFP)
will appear in the "Found New Hardware Wizard" dialog box.
Select "Install the software automatically (Recommended)" and
click the "Next" button.
The "Hardware Installation" dialog box will appear. Click the
"Continue Anyway" button.
When installation of the driver is completed, click the "Finish"
button to finish the scanner driver installation.
"SHARP AL-xxxx" (where xxxx is the model name of your MFP)
will appear in the "Found New Hardware Wizard" dialog box.
Select "Install the software automatically (Recommended)" and
click the "Next" button.
The "Hardware Installation" dialog box will appear. Click the
"Continue Anyway" button.
When installation of the driver is completed, click the "Finish"
button to finish the printer driver installation.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Al-1540Al-1551Al-1530Al-1530csAl-1540csAl-1551cs

Table of Contents