Operation; Basic Operation - Haier LE50K6500U Instruction Manual

04 OPERATION

Basic Operation

Power supply to switch on/off this Unit.
Before switch on, ensure that all connections will be proper
and correct.Press the Key at the bottom of the panel of this
Unit to turn on this Unit.Press the Key to show Menu and
select Power Logo to turn off this Unit.When the power
indicator turns red, this Unit accesses standby state.
Press key to start this Unit.The power indicator turns
Press key once again to switch off this Unit.
If there is no signal for the current signal source, this unit will
automatically set to the standby state
If not to use the main Unit for a long time, unplug the AC
power cord from the AC outlet.
Select input signal sources
After turn on the main unit, press source to select proper input
source. Press ▼/▲ button to select the main signal source.
Press OK button to confirm.
Installation Guide
The installation guide only appear when the TV first time turn
on or reset to factory set .
Please according to the Text Tip to First Time Setup.
off.
15 minutes later.
After setting is complete, You can watch TV .
Operation
EN-14