Language; Time; Date; Units - Honeywell BW Solo User Manual

9.3. Language

English is the default language, but other languages can also be selected for the instrument. You
can select any of the languages for viewing onscreen information. Navigate to a language and
press the button for 1 second to select it.
Note: Language is initially set up during the out-of-the-box power-on sequence, but it can be
changed at any time.

9.4. Time

Time can be in 12- or 24-hour format. The default is 24-hour format.
• Changing the time format to 12-hour adds an indicator of AM or PM.
• Single digits have a "0" prefix (for example, 01:15, 02:30, etc.)
• Click to cycle through the digits
• Press the button for 1 second to select it.

9.5. Date

The date can be shown in these formats (the default is MM.DD.YYYY):
• DD.MM.YYYY
• MM.DD.YYYY
• YYYY.MM.DD
• Single digits have a "0" prefix (for example, 01, 02, etc.).
• When entering the year, it loops in a range from 2018 to 2099 before returning to 2080.
• Press the button for 1 second to select each digit.

9.6. Units

The units of measure can be set as either ppm (parts per million), mg/m
meter), µmol/mol (micromoles per mole), or other units appropriate to the sensor in use.

9.7. Readings

Reset the TWA and STEL readings here. Also, enable/disable Peak reading reset and perform
action.
Note: The default value for the Peak reading is "disabled." If it is enabled, there is an extra menu
option that allows resetting the peak reading. If it is disabled, this menu option is hidden.
Honeywell BW Solo User Manual
(Day.Month.Year)
(Month.Day.Year)
(Year.Month.Day)
27
(milligrams per cubic
3