Advertisement
Advertisement
Table of Contents
Related Manuals for Rockwell ShopSeries RS4900
Summary of Contents for Rockwell ShopSeries RS4900
- Page 1 1200W CaR PoliSheR RS4900...
- Page 3 RS4900 flat nozzle...
- Page 4 RS4900 1200W Car Polisher flat nozzle...
-
Page 5: Component List
1200W Car Polisher CoMPoNeNT liST VaRiable SPeed CoNTRol SWiTCh loCk off buTToN oN/off SWiTCh bRuSh CoVeR RubbeR diSC PoliSh boNNeT SPiNdle loCk oN buTToN auxiliaRy haNdle Not all the accessories illustrated or described are included in standard delivery. aCCeSSoRieS 1. WoRk aRea SafeTy a) keep work area clean and well lit. -
Page 6: Additional Safety Instructions
1200W Car Polisher or moving parts. Damaged or entangled cords controlled with the switch is dangerous and must be increase the risk of electric shock. repaired. e) When operating a power tool outdoors, use an c) disconnect the plug from the power source and/ extension cord suitable for outdoor use. - Page 7 1200W Car Polisher SyMbolS there is considerable vibration or if other defects are detected. If this condition occurs, check the machine to determine the cause. Read the manual 5. Ensure that sparks resulting from use do not create a hazard e.g. do not hit persons, or ignite flammable substances.
-
Page 8: Technical Data
1200W Car Polisher TeChNiCal daTa disc by hand until it is locked. aTTeNTioN: The spindle lock button must only be Rated voltage 230-240V~50Hz used when changing a pad. Never press it when Rated power 1200W the pad is rotating. Rated no load speed 600-3000/min Pad size: Ø180mm... -
Page 9: Maintenance
1200W Car Polisher 10. fiNal WoRk (See fig. l) Use long, sweeping strokes in a criss-cross pattern to bring out the shine. Do not over-press the polisher. WoRkiNG hiNTS foR youR PoliSheR 1. At all times, let the polisher do the work. Do not force or apply excessive pressure to the polisher. - Page 12 Made iN PRC...
Need help?
Do you have a question about the ShopSeries RS4900 and is the answer not in the manual?
Questions and answers
I need the rubber disc but can’t find one in stire
A rubber disc for the Rockwell ShopSeries RS4900 is included as an accessory and can be obtained from the same store that sold the tool.
This answer is automatically generated
I Have a sharp corner 400 mm length of a a concrete path. Can I use this tool with a "grinding" disc if available to round off the corner.