Download  Print this page

Maintenance; Cleaning The Brushes - Black & Decker HRV425BL Instruction Manual

Robotic vacuum
Hide thumbs

Advertisement

Table of Contents
English
process completes, followed by an optional tutorial that
explains Robot App basics.
To view the App User guide and Troubleshooting FAQ:
1. Click the Settings icon to launch the Settings page.
2. Click App User Guide to view instructions on how to use
BLACK+DECKER App features and screens.
3. Click FAQ to view robot vac troubleshooting tips.
Manually operating the vacuum
If you choose to operate the vacuum without the app,
ensure the power switch (
Press the Start/Stop button  (
commence cleaning in Auto Mode. Press the Start/Stop
button  (
  3 
) again to stop cleaning.
When the cleaning cycle is completed, the unit will start
looking for the dock automatically.

Maintenance


WARNING: Make sure the vacuum is completely dry
before using it.
Use only mild soap and damp cloth to clean the
vac. Never let any liquid get inside the vac; never
immerse any part of the vac into a liquid.
iMPORTAnT: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service organizations,
always using identical replacement parts.
Emptying the dust bin (Fig. G)
1. Turn the power switch (
2. Press the dust bin release button (
will pop up from the top of the vacuum.
3. Pull out the dust bin.
4. Open the filter door (
  24 
dust bin.
nOTE: The dust bin can be washed using mild soap and
water. Ensure dust bin is completely dry before reinstalling.
Fig. G
9
Cleaning the filter (Fig. H)
1. Turn the power switch (
2. Remove the dust bin (
3. Pull out the blue or purple filter frame (
pleated filter (
  26 
) and sponge filter (
4. To clean the dust from the filters, use the maintenance
tool or wash both filters under warm running water.
6
  1 
) is in the on position (I).
  3 
) once and unit will
  1 
)   off.
) and the dust bin
  10 
) and empty the contents of the
)   off.
  1 
) as described above.
  9 
) . Remove the
  25 
  27 
) with care.
nOTE: Ensure both filters are completely dry before reinstalling.
5. Reinstall dry filters into the filter frame. Insert the filter
frame into the dust bin, and reinstall dust bin into
the vacuum.

WARNING: Never use the appliance without the filter.
Optimum dust collection will only be achieved with a
clean filter.
Fig. H
Assembly and removal of the main
brush (Fig. I)
1. Turn the power switch (
2. Place the vacuum upside down on a flat surface.
3. Pull up on the two brush frame tabs (
main brush frame (
4. Remove the main brush (
5. Remove all hair and debris using the maintenance
tool (
) .
  19 
6. Assemble in the reverse order.
nOTE: When reinstalling the main brush frame, ensure the
side brushes (
  11 
Fig. I
13
12
24
11

Cleaning the brushes

1. Turn the power switch (
2. Place the vacuum upside down on a flat surface.
10
Cleaning the main brush
1. Clean the main brush regularly with the maintenance tool.
2. Remove all hair and debris using the maintenance
tool regularly.
Cleaning the side brushes (Fig. B)
1. Remove the side brush retaining screw (
2. Remove the side brush (
clean debris in the slot (
3. Reinstall side brush and retaining screw.
Cleaning the wheels
1. Clean the wheels regularly
2. Remove all hair and debris using the maintenance tool.
27
)   off.
  1 
  13 
) .
  12 
) .
) are not trapped under the frame.
14
  1 
)   off.
) , clean the side brush, then
  11 
  21 
) .
26
25
) and lift off the
  14 
14
11
) .
  20 

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hrv425blpHrv420bp07