Whirlpool WDC 1070SL Service Manual page 5

2.3 Adjustment Feet
Washing machine must be installed on (if necessary, use the spirit level to check) firm, level ground. If you plan to
install a washing machine dress on the wooden floor, with a 3 cm thick, 60 × 60 cm square laminate flooring is
fixed on the wooden floor, the washing machine is placed in above to disperse the weight.
If the floor is uneven, adjust the washing machine's four adjustable feet, do not plug in the soles of the feet and
other wood items.
1. With accessory wrench (depending on model), the clockwise direction of the arrow locknut.
2. Slightly more elevated machines, rotating foot height adjustment nut.
IMPORTANT: After adjusting the height of the counterclockwise rotation of the locking nut, locking the cabinet
bottom.
2.4 Remove the outer tub support
IMPORTANT: Do not remove the outer tub support will damage the washing machine.
1. Tilt the washing machine backward 30 ° -40 °, as illustrated pulled out a red plastic bag, and remove the
outer tub support.