Sennheiser HME 26 (4) Specification Sheet

profEssional HEadpHonE witH
condEnsEr
for clEar spEEcH transMission
the lightweight headsets in the HME 26 series, with
their closed supra-aural design, have been developed
for use in radio and television applications.
the headphones are dimensioned for particularly high
sound pressure levels. the headsets are exceptionally
comfortable to wear while providing a high degree of
noise attenuation. with all versions in this series, active-
Gard protects the user from extreme volume peaks.
the condenser microphone with a cardiod pick-up
pattern features excellent acoustic performance, with
linear frequency response over a broad frequency
range up to 20 kHz. another important feature is
its high feedback rejection. the gooseneck microphone
boom can be used on either the left or right side.
Both allow users to make exact adjustments to their
individual requirements.
lightweight
Extremely comfortable to wear due to the
two-piece padded headband and soft earpads
single-sided cable
Headphones allow for high sound pressure levels
activeGard™ (can be switched off)
Volume peaks above
105 dB are eliminated
"flip-away" headphone
allows single-sided listening
pre-polarized condenser microphone
(cardioid character) with linear frequency response
flexible microphone boom can be worn
on the left or right-hand side
Microphone mutes by positioning
the microphone boom vertically
cable, microphone boom and earpads
can be replaced easily
2 year warranty
HME 26 (4)
MicropHonE