Maintenance - Sharp FU-A80Y Operation Manual

MAINTENANCE

CLEANING THE FILTERS
Turn off the unit, and unplug the
1
power cord.
Remove the Front Panel.
2
(Refer to E-6)
Clean the filter and Dust sensor.
3
Gently remove dust from the filter, using a
vacuum cleaner with attachment or similar tool.
Dust sensor
Dust Sensor
Remove the Sensor cover, and remove the
dust on the Sensor filter.
If it is very dirty, wash it with water and
thoroughly.
Care Cycle :
Whenever dust accumulates on the unit or every 1 month.
Deodorizing Pre filter
Sensor cover
Sensor filter
dry it
CLEANING THE UNIT
Wipe with a dry, soft cloth.
For stubborn stains or dirt, use a soft cloth
dampened with warm water.
Do not use volatile fluids and deter-
gents.
Benzene, paint thinner, polishing powder,
detergent ingredients etc., may damage
the unit.
E-8