CONTENTS 1. Safety Instructions 2. What’s in the Box 3. Using Your X500 Important Tips before Use Preparation LED Indication Charging Modes Switching Modes Cleaning Modes Set Time and Scheduled Cleaning 4.Cleaning and Maintenance X500 Anatomy Clean the Rolling Brush...
Page 3
Celsius; please do not use it in a high-temperature environment. Before the device is scrapped, please remove the battery from the robot. When Safety Instructions for X500 and Accessories you remove the battery, please ensure that the device is not connected to a power supply.
Page 4
The power supply must be removed from the socket-outlet before cleaning or 2. About Your X500 maintaining the device. The battery must be removed from the device before it is scrapped. The device must be disconnected from the mains supply when removing the battery.
Do NOT stand around narrow places, such as thresholds and aisles, to reduce the uncovered rate. The X500 will clear all memories and re-plan all work routes if it is manually moved or it is controlled by the remote control during cleaning. To ensure it works efficiently, please do NOT arbitrarily move X500 manually or operate it by remote control during cleaning.
Method 2: When cleaning is completed, or the battery is too low, the X500 will automatically start finding the charging base to charge itself. Please keep the Direction Button charging base energized, or the X500 will not be able to find the charging base.
Click the Edge Cleaning icon on the app or press on the remote control to start cleaning under the Edge Cleaning mode. Note : If the X500 is out of service for a long time, please turn the power switch off.
The cleaning/replacement frequency will depend on the way you use the scheduled cleaning. X500. 1. Make sure the main power switch on the bottom of the X500 is turned on. X500 Anatomy 2. Press on the remote control. The time will blink on the display.
Charging Base 2) Carefully unwind and pull off any hair or string that is wrapped between the main unit and the side brushes. 3) Use a cloth dampened with warm water to remove dust from the brushes or to gently reshape them. 1.
Clean the sensors carefully with movements or the X500’s software. a dry cloth. travel path are Restart the X500 by turning abnormal. the power switch off and back The side The side brushes are mounted Please install the side brushes brushes deform in reverse.
Page 11
240 - 360 mins Diameter of main unit 330mm 75mm Thickness of main unit Net weight of main unit 3.0kg 7. Customer Service If you have any issues, please contact us by Online Service on the app or send email to service@tesvor.com.
Need help?
Do you have a question about the X500 and is the answer not in the manual?
Questions and answers
Can I operate the Tesvor model x500 manually?