Pin Assignment; Remote Connector; How To Connect A Remote Control Unit; How To Light The Tally Lamp - Sony TRINITRON PVM-14M2U Service Manual

Pin assignment
Y/C IN connector (4-pin mini-DIN)
Y-input 1 Vp-p, sync negative,
75 ohms
2
CHROMA 300m Vp-p, burst
subcarrier-input Delay time between Y
and C: within O ± 100
nsec., 75 ohms
3
GND for Y-input GND
4 GND for GND
CHROMA-input
REMOTE connector (20-pin)
1
Blue only Brown
2 HNDELAY
Red
3 MAIN/SUB*
Orange
4
EXT SYNC Yellow
5 DEGAUSS
Green
6 R ch ON/OFF* Blue
7 TALLY
Purple
8 LINE B Grey
9 GND
White
10
GND Black
11 GND Pink
12
GND
13 LINEA
14 LINE/RGB
15 GND
16
L ch ON/OFF* Spiral Blue
17
REMOTE
Spiral Purple
18 LINE C
Spiral Grey
19
UNDER SCAN Spiral Pink
20 16:9 Spiral Light Blue
(* For digital audio control)
How to connect a remote control unit
Connect No.17 pin to one of the GND pins (No.9 - 12,
and 15), then connect pins for the functions you want
to use to other GND pins (No.9- 12, and 15).
How to light the tally lamp
Connect No.7 pin to one of the GND pins (No.9 - 12,
and 15).
-5-