Ac In Socket; Audio In; Remote; Line C Connectors - Sony TRINITRON PVM-14M2U Service Manual

....
0
I
Location and Function of Parts and Controls
0
AC IN socket
Connect the supplied AC power cord to this socket and
to a wall outlet.
8
LINE A, LINE B connectors
Two groups (A and B) of line input connectors for the
composite video and audio signals and their loop-
through output connectors.
To monitor the input signal through these connectors,
set the LINFJRGB selector to the LINE position (light
off) and press the A/RGB or BICOMPONENT selector
(light on).
VIDEO IN (BNC)
Connect to the video output of video equipment, such
as a VCR or a color video camera.
For a loop-through connection, connect to the video
output of another monitor.
VIDEO OUT (BNC)
Loop-through output of the VIDEO IN connector.
Connect to the video input of a VCR or another
monitor.
When the cable is connected to this connector, the
75-ohm termination of the input is automatically
released, and the signal input to the.VIDEO IN
connector is output from this connector.
8
(The
..1\/\r
mark Indicates aulomatic tennination.}
AUDIO IN (phono jack)
Connect to the audio output of a VCR or to a
microphone via a suitable microphone amplifier.
For a loop-through connection, connect to the audio
output of another monitor.
AUDIO OUT (phono jack)
Loop-through output of the AUDIO IN connector.
Connect to the audio input of a VCR or another
monitor.
9
LINE C connectors
YIC IN (4-pin mini-DIN)
Connect to the Y IC separate output of a video camera,
VCR or other video equipment.
For a loop-through connection, connect to the Y IC
separate output of a VCR or another monitor.
YIC OUT (4-pin mini-DIN)
Loop-through output of the Y IC IN connector.
Connect to the YIC separate input of a VCR or another
monitor.
When the cable is connected to this connector, the 75-
ohm termination of the input is automatically released,
and the signal input to the Y IC IN connector is output
from this connector.
AUDIO IN (phono jack)
Connect to the audio output of a VCR or a microphone
(via a suitable microphone amplifier).
AUDIO OUT (phono jack)
Loop-through output of the AUDIO IN connector.
Connect to the audio input of a VCR or another
monitor.
O
REMOTE connector (20-pin)
Connect to the tally output of a control console,
special-effect generator, etc. The tally lamp on the
front panel will be turned on and off by the connected
equipment. This connector can also be used for
connecting a remote control unit.
For details on the pin assignment of this connector. see
page 19.
C, RGB/COMPONENT connectors
RGB signal or component signal input connectors and
their loop-through output connectors.
To monitor the input signal through these connectors,
set the LINFJRGB selector to the RGB position (light
on), and press the A/RGB or BICOMPONENT
selector (light on).
R/R-Y IN, GIY IN, BIB-YIN (BNC)
When the EXT SYNC selector is set to the off position
(light off), the monitor operates on the sync signal
from the GIY channel.
To monitor the RGB signal
Connect to the analog RGB signal outputs of a video
camera, etc.
To monitor the component signal
Connect to the R-Y/Y/B-Y component signal outputs
of a Sony Betacam video camera, etc.
R/R-Y OUT, GIY OUT, B/B-Y OUT (BNC)
Loop-through outputs of the R/R-Y IN, G/Y IN, BIB-
Y IN connectors.
When the cables are connected to these connectors, the
75-ohm termination of the inputs is automatically
released, and the signal inputs to the R/R-Y IN, G/Y
IN, B/B-Y IN connectors are output from these
connectors.
To output the RGB signal
Connect to the analog RGB signal inputs of a video
printer or another monitor.
To output the component signal
Connect to the
R-Y/YIB-Y
component signal inputs of
a Betacam video recorder, etc.
AUDIO IN (phono jack)
Connect to the audio output of video equipment when
the analog RGB or component signal is input.
AUDIO OUT (phono jack)
Loop-through outputs of the AUDIO IN connector.
0
EXT SYNC (external sync) connectors
Press the EXT SYNC selector (light on) to use the
sync signal through this connector.
IN (BNC)
When this monitor operates on an external sync signal,
connect the reference signal from a sync generator to
this connector.
OUT(BNC)
Loop-through output of the IN connector. Connect to
the external sync input of video equipment to be
synchronized with this monitor.
When the cable is con.nected to this connector, the 75-
ohm termination of the input is automatically released,
and the signal input to the IN connector is output from
this connector.
9