Operation - Husqvarna K 535i Operator's Manual

To do a function check before you
use the product
1. Do a check of the rear right hand guard (A) to make
sure that it is not damaged.
2. Do a check of the power trigger lockout (B) to make
sure that it operates correctly and that it is not
damaged.
3. Do a check of the keypad (C) to make sure that it
operates correctly.
4. Do a check to make sure that all parts and guards
are correctly attached and not damaged or missing.
5. Charge the battery and make sure that it is correctly
attached to the product.
6. Make sure that the power cutter stops when you
release the power trigger.
C
B
A
To connect the battery charger
1. Connect the battery charger to the voltage and
frequency that is specified on the rating plate.
2. Put the plug in a grounded socket outlet. The LED
on the battery charger flashes green one time.
Note: The battery does not charge if the battery
temperature is more than 50 °C/122 °F. If the
temperature is more than 50 °C/122 °F, the battery
charger makes the battery become cool before the
battery charges.
To connect the battery to the battery
charger
Note: Charge the battery if it is the first time that you
use it. A new battery is only 30% charged.
1. Make sure that the battery is dry.
14

Operation

2. Put the battery in the battery charger.
3. Make sure that the green charging light on the
battery charger comes on. That means that the
battery is connected correctly to the battery charger.
4. When all LEDs on the battery come on, the battery is
fully charged.
5. To disconnect the battery charger from the mains
socket, pull the plug. Do not pull the cable.
6. Remove the battery from the battery charger.
Note: Refer to the battery and battery charger manuals
for more information.
A B C D
745 - 008 - 12.11.2018