Senco SLS15 Specification Sheet

SLS15
ProSeries 18 Gauge Finish Stapler
The SLS15 finish stapler from SENCO is both powerful and
lightweight. The ergonomically correct design increases quality
and productivity in a wide variety of applications.
Applications:
Cabinets, soffit, fascia, drawer assembly, picture frames, case
backs, craft assembly
.
Features and Benefits:
• Adjustable depth-of-drive
• Rear exhaust – keeps oil and dust away from the work surface
• Easy-open latch – for quick loading
• Hardened steel driver – for extended life
• Full soft grip – for comfort and control
• Low load indicator – visible fastener indicator
• Available dual action or restrictive fire
• One-year warranty
• Includes case, fitting, oil, hex wrench and fastener rebate
©2002 SENCO Products, Inc. Litho in U.S.A.
Tool Specifications:
Tool Weight: 2.4 lbs (1.08 kg)
Height: 7.5" (190 mm)
Length: 10" (254 mm)
Staple Capacity: 100
Reg. Operating Pressure: 70-120 psig
Mode of Operation: Available with either Dual Action or
Restrictive Trigger activating mechanisms
Fastener Specifications:
Gauge: 18
Crown: 1/4" (6.35 mm)
Fastener Range: 1/2" – 1"
Finish: Galvanized
www.senco.com
Safety First. ®
The only way to work.