Transport Position; Service - Husqvarna DC 6000 Operator's Manual

• Reinstall the cyclone cone.
• Pull the dust bag over the cyclone cone and close the
bottom with cable ties.

Transport position

The machine can be raised and lowered to make it easier
to handle during transport.
IMPORTANT! It is recommended that machinery be
transported upright where possible.
• Loosen the hose clamp and remove the hose.
MAINTENANCE
• Seal the hose with the cap.
• Remove the pin and locking pin.
• Push down the upper part of the machine until it
reaches the attachment point for the lower position.
• The machine is kept in the upper position by means
of a gas spring. There is no risk of the machine falling
down.
• Replace the locking pin and pin.

Service

IMPORTANT! All types of repairs may only be carried
out by authorised repairmen. This is so that the
operators are not exposed to great risks.
–
English 17