Senco Duraspin DS300-24V Specifications

Fastening Solutions
The powerful SENCO DS300-24V is a cordless utility tool
designed for a wide variety of screw applications.
Professional remodelers, contractors and DlYers will
appreciate the convenience of the 3000 rpm collated screw
system, which increases productivity by eliminating the
need for handling loose screws. The DS300-24V comes
with a powerful 24v battery to drive 1
even the toughest work surfaces. With the built-in extension
you can adjust tool to the proper height to speed
productivity and save your back and knees.

Applications:

Ideal for deck builders, floor sheathing, remodelers and
high end DIYers.

Features and Benefits:

• 24 Volts of Power
• 3000 RPM high-torque motor drives screws without
bogging down
• Drives 1 / " – 3" screws, even into hard woods and
1
4
composites
• Easy depth-of-drive adjustment regulates the precise
amount of countersink
• Fast and simple adjustable height extension
• Ergonomically designed to position hands directly over
screw for precise straight drives
• Comfortable grip for less exertion
• Reverse switch to back out driven screws
• Trigger lock for continuous work
• Patented clutch design means long-lasting durability
• Fast and easy loading of screws
• Easy bit change – from Phillips
• Super-tough drive bits – the longest lasting bits available
• One-year warranty
• Each kit comes complete with tool, two 24 volt batteries,
battery charger, spare drive bits, wrenches, spare non-slip
nose pads and rugged carrying case
Average number of screws

Screw Type

driven per battery charge
#8 X 2" 450
#8 X 2-1/2" 350
#9 X 3" 250
These are representative averages. Your results may vary based on
specific work conditions.
www.senco.com
™
/ " – 3" screws into
1
4
to square
®
©2005 by Senco Products, Inc.
DuraSpin
®
Cordless Collated Screwdriver

Tool Specifications:

Item Code: 1N0001N
Battery Voltage: 24 volts
Battery Ampacity: 2.0 amps
Battery Recharge Time: One hour
RPM: 3000
Weight: 10.8 lbs. (4.9 kg)
Height: 6 / " (175 mm)
7
8
Length: collapsed 31
fully extended 41
Width: 4" (102 mm)
Fastener Capacity: 50 screws (one strip)
Torque Delivered: 70 in-lbs

Fastener Specifications:

Screw Lengths: 1 /
1
4
Screw Diameters: #6 – #10
DS300-24V
/ " (800 mm),
1
2
/ " (1054 mm)
1
2
" – 3" (32 mm – 75 mm)
(see reverse side for chart)