Senco RoofPro 450 Specifications

Fastening Solutions
RoofPro 450 Coil Nailer is our Pro Series Roofing Coil Nailer. This
construction grade tool has steel wear plates and has fully adjustable
shingle guide, drive depth and exhaust.
Applications:
For asphalt and fiberglass shingle nailing, for both new roofs
and reroofing. Also for attaching waterproof tar paper, metal
drip edges, insulation board.
Features and Benefits:
• Aluminum main housing and cap – more durable than magnesium
for punishing roofing environments
• Tool-free adjustable depth of drive for consistent and controllable
nail set
• Comfort and convenience features include: durable comfort grip, 360
adjustable exhaust (tool required), and adjustable shingle guide
• Steel wearplates reduce shingle abrasion on tool
• Adjustable nail canister accommodates entire range of true
round-head roofing nails.
• Tool includes case, tool oil and wrench
©2005 by Senco Products, Inc.
RoofPro
Coil Roofing Nailer

Tool Specifications:

Item #: 3C0001N: Contact Actuation (Dual Action)
3C0002N: Sequential Actuation (Restrictive)
Weight: 5.9 lbs. ( 2.68 kg)
Height: 9.75" (247.6 mm)
Length: 9.75" (247.6 mm)
Nail Capacity: 120
Collation: Conical wound, angled coil wire
Operating Pressure: 70-120 psig (4.8-8.3 bar)
Mode of Operation: Tool is available with either sequential
or contact actuation trigger mechanism.
Hose Fitting: 1 ⁄4 " NPT
Fastener Specifications:
Drives 11 gauge (.120") , Full Round Head Nails 3/4" 1-3/4" smooth
shank. Capacity 120.
HJ (.120)
www.senco.com
450
™
3 / 1 1 1 /
1 3 /
4 2
4
7 / 1 1 /
8 4