Fujitsu TeamPad 500 Operation Manual page 20

Hide thumbs

Advertisement

Table of Contents
Attaching the printer unit
Perform the removing procedure in reverse order.
(1) Firmly insert the cables that correspond to connector. (Figure 2.5.4.2 (a))
(2) Set the connector latch with your finger toward the direction of arrow.
(3) Mount the printer unit in the HHC unit. (Figure 2.5.4.2 ( b))
(4) Tighten two screws to fix the printer unit. (Figure 2.5.4.2 (c))
(5) Close the printer cover.
(a)
Figure 2.5.4.2 Attaching the printer unit (1/2)
(b)
2-9

Advertisement

Table of Contents
loading

Table of Contents