Samsung WM55H User Manual page 18

Manual Network Setup (Wireless)
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and
DNS server address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are displayed.
How to set up manually
1 Set Network Type to Wireless from the
2
The Network function searches for available wireless networks. When done, it displays a list
of the available networks.
3
In the list of networks, press the u or d button to select a network, and then press the E
button twice.
" If the desired wireless router does not appear, select
" If the router cannot be found after retrying, select the
The Add Network button appears.
4
If the Enter the password for (AP name).
router that does not have security, go to step 7.
5
If the router has security, enter the
6
When done, use the right arrow button to move the cursor to Done, and then press E. The
network connection screen appears and the verification process starts.
7
Select Cancel while network connections are being attempted. This will stop the connection.
8
Select IP Settings on network connection screen. The
9
Select the field at the top, press E, and then set
entry process for each field in the IP
" Setting IP Setting to Enter manually
manually.
10
When done, select OK at the bottom of the page, and then press E. The network test
screen appears and the verification process starts.
11 When the connection has been verified, the
Internet. If you have any problems using online services, please contact your Internet
service provider" message appears.
Open Network Settings page.
Refresh to search again.
Stop button.
screen appears, go to step 5. If you select a wireless
Enter the password for (AP name). (Security key or PIN).
IP Settings screen appears.
IP Setting to Enter manually. Repeat the
Address.
automatically changes DNS Setting
"Success! Your device is connected to the
to Enter
18