CONTENTS 1. Introduction 2. Diagram and Components 3. Initial Setup 4. Features 5. Mounting Solutions 5.1 Installing the Air Vent Pedestal 5.2 Removing the Air Vent Pedestal 5.3 Using the Air Vent Pedestal + Swivel Adaptor 5.4 Installing the Windshield Pedestal 6.
Congratulations on your purchase of one of the most advanced, GPS friendly devices ever created – Seidio’s G2350 car cradle for the Treo 650 Smartphone. It has been developed from the ground up for both ease of use and maximum capability.
Step 4: By combining your cradle/Treo 650 with GPS navigation software, the built-in SiRF Star III GPS receiver can locate where you are and determine the best route to your intended destination. Make the following adjustments to your GPS software settings:...
Caution: DO NOT insert the power cable in DC Out. Doing so may cause damage to the cradle or the Treo 650! 4.2. GPS: Built-in SiRF Star III GPS receiver attached via serial connector to your Treo 650. 4.3. Mounting Solutions: Users can mount their cradles based on individual preferences with the included mounting products.
5. MOUNTING SOLUTIONS 5.1 Installing the Air Vent Pedestal Slide the pedestal into your vehicle’s air vent and hook the locking clips onto the back of the vent. To secure the pedestal on the vent, squeeze the locking clips tightly and slide the locks toward the vent.
For more information and updates, visit our websites at www.seidio-europe.com. Our customer service representative will be more than happy to assist you with any questions. Thank you for purchasing from Seidio – we appreciate your business! Seidio, Inc. www.seidio.com Rev. 1.1...