Controls; Handling And Use; Charging The Battery - Silvercrest SMA 500 A1 Operating Instructions Manual

Controls

Speaker
Connection socket AUX-IN (3.5 mm jack socket)
2
3 Operating and charging LED
On/Off switch (POWER ON / OFF)
4
Volume control (VOL + / –)
5
BASS switch (ON / OFF)
6
Mini USB connection socket (POWER INPUT)
7
Speaker cable with 3.5 mm jackplug
8
Charging cable (USB to Mini USB)
9

Handling and use

This section provides you with important information on
handling and using the device.

Charging the battery

The integrated battery must be fully charged before using
the device.
♦ Ensure that the On/Off switch
♦ Connect the USB connector of the charging cable
to a PC or a USB power supply.
♦ Connect the Mini USB connector of the charging
cable
of the device. The operating LED
and the battery is charged.
SMA 500 A1
to the POWER INPUT connection socket
9
is in the OFF position.
4
3 illuminates in red
GB
9
7
9