16-74 ELECTRICAL SYSTEM
Meter, Gauge, Indicator Unit
Meter Unit Inspection
Remove the meter unit (see Meter Unit Removal).
 Yellow ABS Indicator Light (LED) (–)
 Green Neutral Indicator Light (LED) (–)
 Blue High Beam Indicator Light (LED) (+)
 Green Right Turn Signal indicator Light (LED) (+)
 Yellow KTRC Indicator Light (LED) (–)
 Battery (+)
 Green Left Turn Signal indicator Light (LED) (+)
 ECU Communication Pulse
 Speed Sensor Pulse
 Tachometer Pulse
 Fuel Level Sensor
 Red Warning Indicator Light (LED, Oil Pressure
 Left Switch Housing Upper Button (–)
 Left Switch Housing Lower Button (–)
 Ground (–)
Do not drop the meter unit. Place the meter unit so
that it faces upward. If the meter unit is left upside
down or sideways for a long time or dropped, it will
malfunction. Do not short each terminals.
Check 3-1: Meter Unit Primary Operation Check
Using the auxiliary leads, connect the 12 V battery [A] to
the meter unit connector as follows.
Connect the battery positive (+) terminal to the terminal
Connect the battery negative (–) terminal to the terminal
Connect the terminal  to the battery (+) terminal.