Download  Print this page

Philips FM20/30 Instructions For Use Manual Page 86

Release j.3 with software revision j.3x.xx patient monitoring.
Hide thumbs

Advertisement

3 Basic Operation
CL Transducer Unassignment
The cableless transducer needs to be unassigned:
before being used with another base station on another patient
to allow cleaning before docking it back onto the base station (e.g. to replace it with a fully charged
transducer of the same type)
There are three methods to do this:
Open the setup menu of the measurement e.g.
1
Select
2
3
A confirmation window opens with the prompt
Select the
4
or
1
Open the
Select the symbol of the cableless transducer you want to unassign, and select
2
pop-up menu.
A confirmation window opens with the prompt
3
Select
4
or
Redock the CL transducer at the base station.
1
Switch the base station to stand-by.
2
Remove the CL transducer; it is now unassigned.
3
NOTE
When a CL transducer is unassigned, all the measurements from this transducer are no longer
monitored; e.g. if you unassign a CL Toco
longer monitored.
CL Pods Assignment
The CL Pods are assigned by simply docking them at the base station connected to the patient's fetal
monitor.
CL Pods Unassignment
To unassign a CL Pod, there are four methods:
Open the setup menu of the measurement e.g.
1
Select
2
3
A confirmation window opens with the prompt
Select
4
or
1
Open the
Select the symbol of the CL Pod you want to unassign, and select
2
A confirmation window opens with the prompt
3
86
from the open setup menu.
Remove
pop-up key. A message confirms
Confirm
window.
Tele Info
the pop-up key. A message confirms
Confirm
from the open setup menu.
Remove
the pop-up key. A message states then
Confirm
window.
Tele Info
by selecting the numeric on the screen.
FHR1
Please Confirm
cl US has been removed
Please Confirm
cl US has been removed
+
MP, the Toco measurement, SpO
by pressing the numeric on the screen.
SpO
Please Confirm
<cl Measurement> has been removed
Please Confirm
and
Device will be removed
.
from the
Remove
and
Device will be removed
.
, and MECG are no
2
and
Device will be removed
from the pop-up menu.
Remove
and
Device will be removed
.
.
.
.
.

Advertisement

Table of Contents

This manual is also suitable for:

Avalon clFm40/50

Comments to this Manuals

Symbols: 0
Latest comments: