Download  Print this page

Philips FM20/30 Instructions For Use Manual Page 56

Release j.3 with software revision j.3x.xx patient monitoring.
Hide thumbs

Advertisement

3 Basic Operation
Switching On: FM40/FM50
Connect the monitor to AC mains.
1
Press the On/Standby switch.
2
Adjusting the Display Angle (FM20/FM30)
You can tilt the display on the FM20 and FM30 to one of five different positions, or you can fold it
completely down. The tilt/fold mechanism works on a one-way ratchet system. You hear a click as
each of the five positions is reached. The screen can be folded back down only after tilting the display
forwards as far as it will go.
To tilt the display from the folded position:
1
Unlock the display by releasing the catch.
Lift the display forward. You will hear a click as the first position engages. If you want to tilt the
2
display further, lift the display further forward until you reach the desired angle.
56
The green LED lights up.
The monitor performs a self-test as it starts up.
for the software and firmware are printed on the fetal trace paper (if recorder
configured to
).
On
The monitor display comes on.
There is a start-up tone from the loudspeaker.
, the serial number, and revisions
Selftest: OK
is
Auto Start

Advertisement

Table of Contents

This manual is also suitable for:

Avalon clFm40/50

Comments to this Manuals

Symbols: 0
Latest comments: