Pop-up keys are context-sensitive graphical keys that appear automatically on the monitor screen when
required. For example, the
Using the Touchscreen
Select screen elements by pressing them directly on the monitor's screen.
Disabling Touchscreen Operation
To temporarily disable the touchscreen operation of the monitor, press and hold the
permanent key for about three seconds. A red padlock will blink on the
Press and hold the
When you switch on the monitor, it starts up in Monitoring Mode. To change to a different mode:
Your monitor has four operating modes. Some are passcode protected.
and select a mode.
The Monitoring Mode is the normal operating mode to
monitor patients. You can change elements such as alarm
limits. When you discharge the patient, these elements
return to their default values.
You cannot select or change grayed out items. These items
are for your information only. To change these items,
switch to the Configuration Mode.
The Demo Mode is used for demonstration and training
purposes. Do not change into Demo Mode during
monitoring. When transducers are connected to the
monitor and the recorder is on, a demo trace is recorded.
But the demo trace is not transmitted when the fetal
monitor is connected via RS232 to an information and
surveillance system such as OB TraceVue/IntelliSpace
pop-up key appears when you need to confirm a change.
permanent key again for about three seconds to re-enable the
3 Basic Operation