Download  Print this page

Philips FM20/30 Instructions For Use Manual Page 45

Release j.3 with software revision j.3x.xx patient monitoring.
Hide thumbs

Advertisement

Battery Status LED for CL Pods
The CL Pods do not have their own battery status LED, but a small battery gauge on their display. On
the Avalon CL base station the battery status LED for the CL Pods is located directly under the
docking slot.
The battery status LED shows five different states:
Status
Green
Yellow
Yellow blinking
Cyan
Off
Audio Signal
The Avalon CL base station has audio signals to let you know when a transducer's battery has to be
recharged, or if the base station cannot set up radio communication with a CL transducer or a CL Pod.
If the base station issues a descending tone sequence, the attempt to set up radio communication
to a CL transducer or a CL Pod has failed.
If an interval tone is played, the battery of one or more the CL transducers or CL Pods need to be
recharged.
Alarming is only available at the Avalon Fetal Monitor, not at the Cableless Measurement Devices, see
the Instructions of Use for the IntelliVue Cableless Measurements.
Battery status LED for CL Pods
1
Meaning
The docked CL Pod is fully charged.
The docked CL Pod is charging.
The communication is established with the docked CL Pod.
Indicates that the docked CL Pod or the charging slot has a technical
problem that needs your attention. Check your fetal monitor for a related
INOP message.
The battery status LED is off, when no CL Pod is docked.
3 Basic Operation
45

Advertisement

Table of Contents

   Related Manuals for Philips FM20/30

This manual is also suitable for:

Avalon clFm40/50

Comments to this Manuals

Symbols: 0
Latest comments: