Download  Print this page

Connecting The Monitor To Ac Mains; Wired Transducers - Philips FM20/30 Instructions For Use Manual

Release j.3 with software revision j.3x.xx patient monitoring.
Hide thumbs

Advertisement

3 Basic Operation

Connecting the Monitor to AC Mains

WARNING
Always use the supplied power cord with the earthed mains plug to connect to an earthed AC
mains socket. Never adapt the mains plug from the fetal monitor to fit an unearthed AC mains
socket.
Check that the line frequency is correctly configured in the
FM20/FM30 only: The protective earth conductor is required for EMC purposes. It has no
protective function against electric shock. Double and/or reinforced insulation protects this
device against electric shock.
Do not use AC mains extension cords or multiple portable socket-outlets.
Always ensure that the monitor is positioned so that the AC mains plug is easily accessible, to allow
disconnection of the monitor from the AC mains.

Wired Transducers

Toco (M2734A) and Toco MP Transducer (M2734B)
Ultrasound Transducer (M2736A)
34
menu.
Global Settings
Transducer finder LED - lights up
1
on the transducer supporting to
identify the measurement source
2
"MP" for M2734B "Toco MP"
transducers (additionally capable
of providing the maternal pulse
measurement)
Belt button
3
1
Cable - connects to any of the
four fetal sensor sockets on the
monitor
The M2736AA US transducer is
identical to the M2736A US
transducer, including all specifications

Advertisement

Table of Contents

   Related Manuals for Philips FM20/30

This manual is also suitable for:

Avalon clFm40/50

Comments to this Manuals

Symbols: 0
Latest comments: