Download  Print this page

Philips FM20/30 Instructions For Use Manual Page 274

Release j.3 with software revision j.3x.xx patient monitoring.
Hide thumbs

Advertisement

28 Specifications and Standards Compliance
Performance Specifications
Auto Mode Repetition Times
Venipuncture Mode Inflation
Inflation Pressure
Automatic deflation after
*1: Clinical investigation with the auscultatory reference method
The 5th Korotkoff sound (K5) was used to determine the diastolic reference pressures.
The approximation MAP = (2*DIA + SYS) / 3 was used to calculate reference MAP (mean
arterial pressure) values from the systolic and diastolic reference pressures.
The NBP measurement is suitable for use with pregnant (including pre-eclamptic) patients.
Alarm Specifications
Systolic
Diastolic
Mean
Overpressure Settings
> 300 mmHg (40 kPa) > 2 sec
SpO2
Complies with ISO 80601-2-61:2011 / EN 80601-2-61:2011.
Measurement Validation: The SpO
blood sample reference measured with a CO-oximeter. Pulse oximeter measurements are statistically
distributed, only about two-thirds of the measurements can be expected to fall within the specified
accuracy compared to CO-oximeter measurements.
Display Update Period: Typical: 2 seconds, maximum: 30 seconds. Maximum with noninvasive blood
pressure INOP suppression on: 60 seconds.
274
1, 2, 2.5, 3, 5, 10, 15, 20, 30, 45, 60, or 120 minutes
20—120 mmHg (3—16 kPa)
170 seconds
Range
Adjustment
Adult: 30—
10—30 mmHg: 2 mmHg (0.5 kPa)
270 mmHg (4—
>30 mmHg: 5 mmHg (1 kPa)
36 kPa)
Adult: 10—
245 mmHg (1.5—
32 kPa)
Adult: 20—
255 mmHg (2.5—
34 kPa)
accuracy has been validated in human studies against arterial
2
Adjustment
not user adjustable
Alarm Delay
System alarm delay
(see "Fetal Monitors" on
page 267).

Advertisement

Table of Contents

This manual is also suitable for:

Avalon clFm40/50

Comments to this Manuals

Symbols: 0
Latest comments: