Download  Print this page

Philips FM20/30 Instructions For Use Manual Page 225

Release j.3 with software revision j.3x.xx patient monitoring.
Hide thumbs

Advertisement

The following trace shows the MECG waveform:
FHR1 trace interrupted
1
2
header
MECG
Recorder speed
3
FHR1 trace resume
4
: This recording mode gives you a delayed six-second snapshot of the maternal and/or
Overlap
direct fetal ECG for documentation on the fetal strip, but without interrupting the fetal trace. It
takes 5 minutes to print this six-second snapshot at a recorder speed of 3 cm/min. It is
documented as if it was recorded at 25 mm/s.
The following trace shows both the DECG and MECG waveforms:
FHR1 and FHR2
1
header
2
DECG
22 Printing the ECG Waveform
225

Advertisement

Table of Contents

This manual is also suitable for:

Avalon clFm40/50

Comments to this Manuals

Symbols: 0
Latest comments: