Download  Print this page

Philips FM20/30 Instructions For Use Manual Page 189

Release j.3 with software revision j.3x.xx patient monitoring.
Hide thumbs

Advertisement

Check the artifact suppression setting and change it if necessary (see "Suppressing Artifacts" on
3
page 190).
Measurement label (DFHR1)
1
2
Measurement label (Toco)
3
Measurement label (FHR2)
Measurement label (HR)
4
5
1mV scale bar
6
MECG wave with maternal label
DECG wave with fetal label
7
8
Measurement label (Temp) maternal temperature
Measurement label NBP
9
NOTE
The 1mV scale bar for the DECG and MECG wave is not displayed on the screen if you monitor
DECG or MECG with an Avalon CTS system. The Avalon CTS system does not provide a scaled
ECG.
WARNING
Periodically compare the mother's pulse with the signal coming from the monitor's loudspeaker to
ensure that you are monitoring fetal heart rate. If the MHR coincides with the FHR, do not
misinterpret the MHR as the FHR (see also "Confirm Fetal Life Before Using the Monitor" on
page 10 and "Cross-Channel Verification (CCV)" on page 135.
17 Monitoring FHR Using DECG
189

Advertisement

Table of Contents

   Related Manuals for Philips FM20/30

This manual is also suitable for:

Avalon clFm40/50

Comments to this Manuals

Symbols: 0
Latest comments: