Download  Print this page

Monitoring Decg - Philips FM20/30 Instructions For Use Manual

Release j.3 with software revision j.3x.xx patient monitoring.
Hide thumbs

Advertisement

17 Monitoring FHR Using DECG

Monitoring DECG

To simultaneously measure DECG and MECG, you need the CL ECG/IUP transducer or the patient
module for DECG, and a Toco+, CL Toco
"Monitoring Maternal Heart / Pulse Rate" on page 213). Alternatively, you can monitor the maternal
pulse rate via pulse oximetry (see "Pulse Rate from SpO2" on page 220). You can also monitor
maternal pulse with the Toco MP or CL Toco
+
Toco
or Toco MP transducer, you can also monitor with a CL Toco
Switch on the recorder.
1
The heart rate monitored via DECG is labeled
2
configured, the DECG wave is displayed automatically on the screen, labeled
MECG is being monitored, both waves are displayed, with the DECG wave above the MECG
wave. The MECG wave is labeled
188
+
MP, or CL ECG/IUP transducer for MECG (see
+
MP transducer. In any case where you would use a
/
DFHR1
DFHR2
and
.
MECG
maternal
+
MP transducer.
/
on the screen. If
DFHR3
and
DECG
. If
fetal

Advertisement

Table of Contents

   Related Manuals for Philips FM20/30

This manual is also suitable for:

Avalon clFm40/50

Comments to this Manuals

Symbols: 0
Latest comments: