Download  Print this page

Philips FM20/30 Instructions For Use Manual Page 178

Release j.3 with software revision j.3x.xx patient monitoring.
Hide thumbs

Advertisement

15 Monitoring Uterine Activity Externally
Testing Toco Transducers
If any of the following tests fail, repeat the test using another transducer. If the second transducer
passes the tests, confirming that the first transducer is defective, contact your service personnel.
If the second transducer also fails the tests, contact your service personnel.
You can test all Toco transducers, including the cableless ones, as described above.
178
To test a Toco transducer:
1
Switch on the monitor and the
recorder.
Connect the transducer to the fetal
2
monitor.
3
Gently apply pressure to the pick-
up button.
Check if after a few seconds the
4
values on the display and paper
show this change in pressure.

Advertisement

Table of Contents

   Related Manuals for Philips FM20/30

This manual is also suitable for:

Avalon clFm40/50

Comments to this Manuals

Symbols: 0
Latest comments: