Download  Print this page

Changing Signal Loss Delay - Philips FM20/30 Instructions For Use Manual

Release j.3 with software revision j.3x.xx patient monitoring.
Hide thumbs

Advertisement

14 Fetal Heart Rate Alarms
To change the high alarm limit delay time, select
3
from the pop-up list.
4
To change the low alarm limit delay time in seconds, select
seconds) from the pop-up list.

Changing Signal Loss Delay

The signal loss delay is the configurable delay before a
delay:
Connect either an ultrasound or a DECG transducer to a free socket on the monitor.
1
2
Enter the Setup menu for a connected FHR measurement.
Select
3
list.
174
and select the signal loss INOP delay time (in seconds) from the pop-up
SignalLoss Delay
and select the delay time (in seconds)
High Delay
and select the delay time (in
Low Delay
INOP is issued. You can change the
Signal Loss

Advertisement

Table of Contents

   Related Manuals for Philips FM20/30

This manual is also suitable for:

Avalon clFm40/50

Comments to this Manuals

Symbols: 0
Latest comments: