Download  Print this page

Non-stress Test Timer; Setting Nst Autostart/autostop; Viewing The Nst Timer; Timer Expiry Notification - Philips FM20/30 Instructions For Use Manual

Release j.3 with software revision j.3x.xx patient monitoring.
Hide thumbs

Advertisement

Non-Stress Test Timer

8
The non-stress test (
the time you set for the NST.

Setting NST Autostart/Autostop

You can set the recorder so that it starts automatically (
and stops automatically (
As default,

Viewing the NST Timer

You can configure the timer notification symbol, (the NST label), a progress bar and the elapsed time
to be displayed in the top left-hand corner of the screen. By default, the NST timer is not displayed on
the screen.
Alternatively, you can view the timer in the
To open the
Either
Press the
Or
Access the NST pop-up keys (see "Accessing the NST Setup Pop-up Keys" on page 130), and
press the

Timer Expiry Notification

When the timer expires, the color changes from blue to green, you hear a single tone, and a message
appears in the status line on the main screen.
The volume of the tone can be set in Configuration Mode.
) timer shows the elapsed time for the non-stress test. The timer counts up to
NST
NST Autostop
is
, and
NST Autostart
On
window:
Timers
SmartKey.
Timer
key.
Timers
NST Autostart
) when the NST is complete (when the set run time has elapsed).
is
.
NST Autostop
Off
window.
Timers
) when the NST timer is started,
8
129

Advertisement

Table of Contents

   Related Manuals for Philips FM20/30

This manual is also suitable for:

Avalon clFm40/50

Comments to this Manuals

Symbols: 0
Latest comments: