Download  Print this page

Sanyo MCD-Z260F Instruction Manual page 8

Hide thumbs

Advertisement

CD PLAY
Both 8 cm and 12 cm discs can be played in
this unit.
NOTE:
Place only one disc at a time in the CD com-
partment.
-
Only disc bearing the logo in Fig. 7 can be
played in this unit.
Handling compact discs
-
Always place the compact disc in the CD com
partment with the label facing upward.
Compact discs can be played on only one side.
Fingerprints and dust should be carefully wiped
off the disc's signal surface (opposite the la-
beled side) with a soft cloth. Gently wipe in a
straight motion from the inside to the outside
of the disc.
Discs should be returned to their cases after
used to avoid serious
scratches
that could
cause the player to skip.
Do not expose a disc to direct sunlight, high
humidity, or high temperatures
for extended
periods of time to prevent warping the disc.
Do not stick paper or write anything
with a
ballpoint pen on a disc.
Do not use cleaners or antistatic
sprays on
discs, like those used for phonograph records.
LOADING A DISC
1.
Set [FUNCTION]
to CD.
"Cd" appears.
2.
Press [CD OPEN]. The lid will open.
3.
Place a disc carefully on the turntable
in the
CD compartment,
with the label side facing
up (Fig. 8).
4.
Push [PUSH TO CLOSE] on the lid to close it.
The display will show the total number (Max.
99) of tracks on disc.
NOTES:
If a disc is loaded upside down, or if no disc is
loaded, the CD player will not operate.
During CD play, do not open the CD compart-
ment lid. Always press [STOP/CLEAFf]
and
wait for the disc to stop rotating before open-
ing the CD compartment
lid.
NORMAL PLAY
1.
2.
3.
Press [PLAY/PAUSE]. Play will begin with track
number 1.
The following information
is displayed:
The current track number
Play indicafor (
)
NOTE:
To start play from the desired track, select the
track by using [SKIP/SEARCH]
K<
or FM,
then press [PLAY/PAUSE].
Adjust
[VOLUME],
[TONE]
and
[BASSXPANDER]
as desired.
Press [STOP/CLEAR]
to stop play at any time.
When the last track has played, the CD player
will automatically
stop.
Temporarily
stopping play
Press [PLAY/PAUSE]
during play. 'r
" blinks. To
resume play, press [PLAY/PAUSE]
again.
Track skip
Press and release [SKIP/SEARCH]
K<
or EM
repeatedly during play to quickly locate the begin-
ning of a track.
The display will show the number of the selected
track. Play will continue from the beginning of the
new track.
Search (forward/reverse)
If [SKIP/SEARCH]
!4< or E>l is pressed during
play, the CD player will search at high speed in
the forward or reverse direction while the button is
being pressed. When the button is released, nor-
mal play will continue.
Repeat play
This function allows all the tracks on a disc or the
programmed
tracks only to be played repeatedly.
Press [REPEAT/FM
MODE] before play or during
play. "REP
appears.
To cancel the repeat play function, press [REPEAT/
FM MODE] again.
7

Advertisement

loading

  Also See for Sanyo MCD-Z260F

  Related Manuals for Sanyo MCD-Z260F