Download  Print this page

Manual Recording; Tape Dubbing - Sanyo GCD 1500 Instruction Manual

Cd stereo sound system
Hide thumbs

Advertisement

-.
.
.
6.
7.
8.
c)
,. .
i%ss
the MEMORY
switch.
"pROG."
remains
lit.
EDIT SIDE-A
PROG.
5
13.00
The remaining
time on side A eppears
on the time display.
Repeat steps 5-6
to programme
the tracks to be recorded
onto side
A.
If a track which exceeds
the remaining
time on side A is selected,
"SIDE-A"
blinks on the display.
When the MEMORY
switch is pressed,
"SIDE-A"
disappears
and
"SIDE-B"
appears.
The remaining
time on side B appears
on the
display.
This and subsequent
tracks are recorded
on side B.
Repeat steps 5-6
to programme
the tracks to be recorded
onto side
B.
If a track exceeding
the remaining
time on side B is programmed,
"Err" will appear
on the display for 4 seconds.
Backward
skip edit recording
Track 4 will be interrupted.
ii
9.
Insert the
C-46
cassete
tape into the tape deck to record side A.
10. Press the REC button on TAPE B.
11. Press the " F/11
" switch. Recording
starts.
The programmed
tracks will play in sequence
starting from track 5,
and pause at the beginning
of track 1.
\lJ\l/
PIAY
EDIT
PROG.
SIDE-B
1 0.00
12.
After the tape deck stops automatically
at the end of side A, turn over
the cassette
and reinsert it.
13. Press the REC button to start recording
of side B.
The player will start playback
with track 1.
When
all tracks for side B have finished,
disc play stops. The tape
deck will continue
recording
to the end of the tape (side B).
SIDE A
i
1
I
2
3
4
1>
Manual
reverse
6
5
4
SIDE B
I
Track 8 will be interrupted.
This type of recording
is the easiest to perform and the tape length setting
is not required.
1.
2
3.
4.
5.
Press the CD function
switch.
Load a disc into the CD player.
Press the EDIT switch until "c---"
appears
on the display.
Press the REC button.
Press the "
/II
"
switch. Recording
starts on side A.
Record from the beginning
of a track.
6.
After the tape deck stops automatically
at the end of side A, turn over
the cassette
and reinsert
it.
7.
Press the REC button to stari recording
of side B.
The player will start playback
with the beginning
of track 4.
When all tracks for side B have finished,
disc play stops. The tape deck
will continue
recording
to the end of the tape (side B).
MANUAL
RECORDING
For programmed
recording,
programme
the material
in advance
(as
described
under "PROGRAMMED
PLAY").
1. Press the CD function
switch.
~ad a disc into the CD player.
~>,~ress
the REC button,
4. Press the "
/11
" switch. Recording
starts.
TAPE DUBBING
(TAPE A to TAPE B)
1.
2.
3.
4.
5.
6.
7.
Load the playback
tape into TAPE A and a blank tape into TAPE B.
Automatic
stop during
dubbing
Press the'TAPE
function switch.
a)
Wind the tape on TAPE A to the beginning
of the tape or a particular
selection.
Select the dubbing
speed with the DUBBING
SPEED/BEAT
CANCEL
b)
switch.
HIGH:
For dubbing
the whole tape at high speed
(twice normal speed).
-
NORMAL:
For dubbing
with monitoring
at normal
speed.
Press the PAUSE button of TAPE B, then press the REC button of TAPE
-
B.
Press the PLAY button of TAPE A to start dubbing.
To stop the dubbing
operation,
press
both STOP/EJECT
buttons
simultaneously.
When TAPE A tape is longer than TAPE B:
When TAPE B stops automatically,
TAPE A continues
playback
mode
at normal speed.
When TAPE B tape is longer than TAPE A:
When TAPE A stops automatically,
TAPE B erases the tape to the end.
To dub other selections
repeat steps 3-7
as described
above.
If you change
the function
position
during
the dubbing
operation,
TAPE B will continue to record the new sound source at normal speed.
Do not change
the dubbing
speed
during the dubbing
operation.
-8-

Advertisement

loading