Environmental Conditions - Siemens SIMATIC IPC277E 19" INOX PRO Operating Instructions Manual

Specifications
5.3 Technical specifications
Interfaces
DisplayPort (DPP)
USB
LAN ports X1 P1/X2 P1, RJ45
Keyboard, mouse
For unique labeling, the LAN interfaces are numbered on the enclosure. The numbering by the
1
operating system can differ.
Teaming can be set and initiated in the configuration interface. In teaming operation, jumbo
2
frames, e.g. for the camera application, are not supported.
5.3.2

Environmental conditions

Climatic ambient conditions
Temperature, tested in accordance with IEC 60068-2-1, IEC 60068-2-2
•
•
•
•
Relative humidity, tested in accordance with IEC 60068-2-78, IEC 60068-2-30
•
•
Air pressure, in accordance with IEC 60068-2-13
•
•
Mechanical ambient conditions
Vibration, tested according to IEC 60068-2-6
•
•
Shock resistance, tested in accordance with IEC 60068-2-27, IEC 60068-2-29
•
•
30
Temperature gradient in operation
Ambient temperature in operation
Temperature during storage/transport
Storage/transport, gradient
Operation
Storage/transport
Operation
Storage/transport
Operation
Storage/transport
Operation
Storage/transport
Connection of display devices with DPP connection
4 USB ports, maximum 6 W USB load.
3 × USB 2.0, a maximum of 2 can be operated in high-current
•
mode at the same time
1 x USB 3.0, high current
•
Intel LAN-Controller Springville i210; 10, 100, 1000 Mbps, teaming
1
is supported
2
Connection via USB port
Max. 10 °C/h, no condensation
0 ... 45 °C
-20 to +60 °C
Max. 20 °C/h, no condensation
5 ... 85% at 30 °C, no condensation
5 to 95% at 25/55 °C, no condensation
1080 to 795 hPa, corresponds to an elevation of -1000 to 2000 m
1080 to 660 hPa, corresponds to an elevation of -1000 to 3500 m
10 to 58 Hz: 0.15 mm
58 to 500 Hz: 10 m/s , 10 cycles
2
5 to 8.5 Hz: 7 mm
8.5 to 500 Hz: 10 m/s
2
150 m/s2, 11 ms, 100 shocks per axis
250 m/s2, 6 ms, 1000 shocks per axis
Compact Operating Instructions, 05/2017, A5E37416443-AE
IPC277E 19" INOX PRO