16-84 ELECTRICAL SYSTEM
Immobilizer System (Equipped Models)
Insert the current registered ignition key into the ignition
switch and turn it to "ON."
Keep the other ignition keys away from the immobilizer
If there is any problem in the registration, the red warning
indicator light (LED) and immobilizer warning indicator [A]
blink to display the collation error.
Immobilizer Amplifier Failure
Registered Ignition Key Collation Error
The registered ignition key is registered in the ECU.
The red warning indicator light and immobilizer warning
indicator (LED) and immobilizer warning indicator [A] blink
1 time and stops for 1 second and the repeats this cycle to
indicate successful registration of the registered ignition
Turn to "OFF" the registered ignition key and remove it.
The red warning indicator light (LED) and immobilizer
warning indicator [A] blink to display the registration
Insert next key and turn it to "ON" within 15 seconds af-
ter previous key is turned to "OFF" and removed other-
wise registration mode will be ended and the red warn-
ing indicator light (LED) goes off.
To return to the registration mode start the registered
ignition key verification procedure. This applies to all
ignition key registration.
Insert the other remaining registered ignition key to the
ignition switch and turn it to "ON."