3-72 FUEL SYSTEM (DFI)
Fuel Tank Bolt [A] (Both Sides)
Fuel Tank Bracket Bolts [B]
Fuel Pump Lead Connector [C]
Lift up the front portion of the fuel tank.
Slide the clamps, and disconnect the hoses [A].
Be sure to place a piece of cloth around the fuel hose joint.
Wipe off the dirt of the surface [A] around the connection
using a cloth or a soft brush.
When removing with flat tip screwdriver
Insert the flat tip screwdriver [A] into slit on the joint lock
Turn the driver to disconnect the joint lock.
When removing with fingers
Open and push up [C] the joint lock with your fingers.
Prying or excessively widening the joint lock ends
for fuel hose removal will permanently deform the
joint lock, resulting in a loose or incomplete lock
that may allow fuel to leak and create the potential
for a fire explosion. To prevent fire or explosion
from a damaged joint lock, do not pry or excessively
widen the joint lock ends when removing the fuel
hose. The joint lock has a retaining edge that locks
around the housing.