3-64 FUEL SYSTEM (DFI)
Air Cleaner Element Removal/Installation
Refer to the Air Cleaner Element Replacement in the Pe-
riodic Maintenance chapter.
Air Cleaner Element Inspection
Remove the air cleaner element (see Air Cleaner Element
Replacement in the Periodic Maintenance chapter).
Visually check the element [A] for tears or breaks.
If the element has any tears or breaks, replace the ele-
Air Cleaner Oil Draining
A drain hose is connected to the bottom of the air cleaner
to drain water or oil accumulated in the cleaner part.
Visually check the drain hose [A] if the water or oil accu-
If any water or oil accumulates in the hose, remove the
plug [B] from the drain hose and drain it.
Oil on tires will make them slippery and can cause
an accident and injury. Be sure to reinstall the plug
in the drain hose after draining.
Air Cleaner Housing Removal
Remove the fuel tank (see Fuel Tank Removal).
Secondary Fuel Hose (see Fuel Hose Replacement in
the Periodic Maintenance chapter)
Intake Air Temperature Sensor Connector [A]
IMU Connector [B]
Secondary Fuel Injector Connectors [C]
Remove the turn signal relay [D], radiator fan relay [E] and
ESD ECU [F] from the air cleaner housing.
Free the clamps [G] from the air cleaner housing.
Connector Bracket [A]
Slide the clamps.
Air Cleaner Drain Hose [B]
Breather Hose [C]
Loosen the air cleaner housing clamp bolts [D].